Beets are among the most nutrient-dense vegetables you can juice, but their dense, fibrous, and sometimes gritty nature makes them a nightmare for the wrong machine. A standard centrifugal juicer will spin beet pulp into foam, oxidize the nutrients within seconds, and leave you with a dry, stringy mass that wastes half your produce. The specific challenge of juicing beets demands a slow, masticating auger that crushes the cell walls, extracts the deep red pigment and earthy sweetness, and delivers a smooth, silky juice without clogging every five minutes.
I’m Mohammad — the founder and writer behind ProteinJug. I’ve spent years analyzing extraction technology, auger torque specifications, and feed chute geometries across hundreds of juicer models to understand exactly which machines can handle the unique demands of root vegetables like beets.
After combing through technical specs, real-world customer reports, and performance metrics for slow masticating juicers, these are the only models I recommend for anyone searching for the best juicer for beets.
How To Choose The Best Juicer For Beets
Beets are tough. They are hard, fibrous, and loaded with sediment that clogs poorly designed filters. Choosing a juicer for beets means prioritizing a few non-negotiable features that most generic juicers lack. Here is what matters most.
Slow Masticating vs. Centrifugal — The Only Real Choice
A centrifugal juicer spins at thousands of RPMs, shredding beets with a rapidly rotating blade and then flinging the pulp against a mesh screen. This generates heat, introduces oxygen, and degrades the betalain pigments and antioxidants that make beet juice valuable. A masticating juicer, by contrast, uses a single auger to crush and press the produce at 55–80 RPM. This preserves nutrients, produces a much higher yield from the same pound of beets, and delivers a drier pulp with less waste. For beets specifically, masticating is not a preference — it is a requirement.
Auger Torque and Motor Power
Beets are dense, and a low-torque motor will stall, overheat, or struggle when feeding a whole beet into the chute. Look for motors rated at 150 watts or higher, but pay closer attention to torque ratings measured in Newton-meters (Nm). Models with 180–230 Nm of torque can crush whole beets without jamming. A machine that bogs down on beet chunks will make your morning routine frustrating and slow.
Feed Chute Diameter — Prep Time Matters
A narrow 3-inch feed chute forces you to cut beets into thin strips, adding five to ten minutes of prep work per session. A chute measuring 4.3 inches or wider lets you feed whole medium beets or quartered large beets directly. The difference between a 4.3-inch and a 5.8-inch chute is the difference between slicing and loading versus washing and dropping. If you juice beets daily, a wide chute pays for itself in saved time within a week.
Ease of Cleaning and Filter Design
Beet pulp is sticky, fibrous, and stains anything it touches. A juicer with a complex multi-part filter will take ten minutes to scrub. Look for a one-piece stainless steel filter or a metal-free filter that rinses clean under running water. Models that disassemble into three or four pieces for quick cleaning are far more likely to be used consistently. If cleanup takes longer than the juicing itself, the machine will end up in a cupboard.
Quick Comparison
On smaller screens, swipe sideways to see the full table.
| Model | Category | Best For | Key Spec | Amazon |
|---|---|---|---|---|
| Anybear 4.3″ (Silver Gray) | Premium Mid-Range | High torque & baby-safe materials | 180 Nm torque, 65 RPM | Amazon |
| Ninja NeverClog JC151 | Premium | Non-stop juicing, dishwasher safe | 150W motor, 2 pulp filters | Amazon |
| Anybear 4.9″ (Grey & Silver) | Premium High-End | Widest chute & dual-stage auger | 350W, 230 Nm, 4.9″ chute | Amazon |
| TUUMIIST Cold Press | Mid-Range | No-mesh filter & quiet operation | 300W, 55 RPM, 5.3″ chute | Amazon |
| Godspeeds Cold Press | Mid-Range | Whole-fruit, metal-free filter | 300W, 5.8″ feed chute | Amazon |
| Jocuu Slow Masticating | Budget-Friendly | Two-speed control, quiet motor | 60/80 RPM, <60 dB noise | Amazon |
| YOYDS Cold Press | Budget-Friendly | Wide chute & hidden pulp container | 5.5″ chute, 55 RPM | Amazon |
In‑Depth Reviews
1. Anybear Cold Press Juicer (4.3″ — Silver Gray)
This Anybear model strikes the ideal balance of torque, material quality, and ease of use for beet juicing. The 180 Nm motor generates high torque even at a low 65 RPM, which means it crushes whole beets without stalling while minimizing oxidation. The 4.3-inch feed chute is wide enough to accommodate quartered beets without excessive prep, and the auger design pulls produce in aggressively, reducing the need for the pusher.
What sets this juicer apart for beet users is the baby-food-grade Tritan material used in the feed chute. Beets are acidic and can leach plastic flavors from lower-grade materials; Tritan is BPA-free and does not impart any aftertaste. The one-piece stainless steel filter rinses clean in under a minute, solving the sticky pulp problem that plagues beet juicing. The juice comes out smooth with minimal foam and a deep, vibrant color.
Customer reports consistently highlight the quiet operation — an underrated feature when juicing beets, which require longer run times than soft fruit. The 5-year extended warranty gives confidence for daily use. The only trade-off is the 4.3-inch chute is not the absolute largest on this list, but the torque and build quality more than compensate.
Why it’s great
- High 180 Nm torque handles whole beets without stalling
- BPA-free Tritan feed chute prevents plastic aftertaste
- One-piece filter is fast to rinse after sticky beet pulp
- Very quiet operation for early morning juicing
Good to know
- 4.3-inch chute still requires large beets to be quartered
- Premium build comes with a higher cost than budget options
2. Ninja NeverClog Cold Press Juicer JC151
The Ninja NeverClog is engineered specifically to solve the jamming problem that occurs with fibrous and dense ingredients like beets. Its 150-watt high-torque motor operates at slow RPM, but the real differentiator is the auger design and the two interchangeable pulp filters. The Less Pulp filter produces a smoother beet juice with minimal sediment, while the Lots of Pulp filter retains more fiber for those who want a thicker texture.
All parts that contact beet juice are dishwasher safe, which is a significant advantage because beet pulp stains plastic components quickly. The built-in anti-drip lever prevents the messy drips that happen when you pause to add more beets. The 24-ounce juice jug and 36-ounce pulp container provide enough capacity for a full beet juicing session without needing to stop and empty containers.
Customer reviews consistently note that the pulp comes out nearly dry, indicating excellent extraction efficiency. The motor is quiet enough for early morning use, and the reverse function clears any minor jams instantly. The plastic chute has been noted as a potential stress point after extended use, but Ninja’s warranty support is highly responsive. For those who prioritize convenience and cleanup above all, this is the strongest option.
Why it’s great
- Interchangeable pulp filters let you dial in beet texture
- Dishwasher-safe parts make cleanup effortless
- Anti-drip lever prevents countertop messes
- Reverse function clears jams without disassembly
Good to know
- Beets still need to be cut into smaller chunks before feeding
- Plastic juice pitcher feels less durable than stainless steel
3. Anybear Cold Press Juicer (4.9″ — Grey & Silver)
This is the most powerful juicer on this list and the one best equipped to handle large volumes of beets with minimal prep. The dual-stage auger system first crushes the beet, then re-presses the pulp in a second chamber to extract the last drops of juice. Combined with a 350-watt motor delivering 230 Nm of torque, this machine powers through whole beets, carrots, and ginger without hesitation.
The 4.9-inch feed chute is the largest among the premium options here. Most medium beets fit whole, and larger specimens only need to be halved. The BPA-free Tritan material is the same baby-grade plastic used in the smaller Anybear model, so flavor purity is maintained even with acidic beet juice. The one-piece stainless steel filter rinses clean quickly, and the entire machine breaks down into just three pieces for washing.
Customer feedback emphasizes the exceptionally dry pulp produced by the dual-stage system — a clear indicator that the maximum nutritional value has been extracted. The motor runs quietly despite its power, and the included silicone mold for freezing juice concentrate is a thoughtful bonus. The 5-year warranty matches the other Anybear model, making this the safest long-term investment for serious beet juicers.
Why it’s great
- Dual-stage auger produces exceptionally dry pulp from beets
- 4.9-inch chute fits whole medium beets with no cutting
- 230 Nm torque handles dense root vegetables effortlessly
- Tritan material keeps beet juice flavor pure
Good to know
- Higher price point reflects the premium motor and auger
- Slightly taller design requires more countertop clearance
4. TUUMIIST Cold Press Juicer (5.3″)
TUUMIIST has designed a juicer that addresses two of the biggest complaints about beet juicing: noise and filter clogging. The 300-watt motor operates at a low 55 RPM and is noticeably quieter than many competitors, making it suitable for households where early morning noise is a concern. The no-mesh filter design is a clever innovation — instead of a fine screen that beet fibers wedge into, it uses a larger opening that reduces clogging and simplifies cleaning.
The 5.3-inch feed chute is generous, allowing whole apples and halved beets to drop straight through. The slow squeeze technology mimics hand-squeezing, producing a smooth juice with minimal foaming. The machine includes a reverse function to clear jams, and customers report that it handles both leafy greens and hard root vegetables with equal competence. The BPA-free ABS construction is safe for daily use.
Some users have noted that the assembly alignment is precise — the hopper must be turned until the guide mark lines up with the lock symbol, or the machine will not operate. This is a minor learning curve but becomes second nature after a few uses. The 30-day satisfaction guarantee is shorter than the multi-year warranties offered by Anybear, but the lower price point makes this a compelling mid-range choice for beet juicers who value quiet operation and simple cleanup.
Why it’s great
- No-mesh filter design resists clogging from beet fibers
- Very low noise at 55 RPM operation
- 5.3-inch chute reduces beet prep time
- BPA-free materials keep juice clean
Good to know
- Assembly requires careful alignment of the hopper lock
- Pusher may be too short for very large produce
5. Godspeeds Cold Press Juicer (5.8″)
The Godspeeds juicer features the widest feed chute on this list at 5.8 inches, which is wide enough to accept whole medium beets, full apples, and entire celery stalks without any knife work. For households that juice beets daily as part of a family wellness routine, this single feature eliminates the most tedious part of the process. The 300-watt motor provides consistent torque through the masticating auger, and the metal-free filter resists corrosion from beet acids.
Juice yield is impressive — the slow cold press technology extracts a high volume of liquid while leaving the pulp notably dry. The juice and pulp are ejected into separate containers, making it easy to collect pulp for composting or cooking. The machine features overheat protection and a safety lock, which are useful in a busy kitchen where multiple people may use the appliance. The three-step assembly is genuinely quick, and the filter rinses clean under running water without needing a brush.
Customer reviews consistently praise how easily it handles beets, ginger, and carrots — the trio that challenges most juicers. The only limitation is that the plastic construction, while durable, does not feel as premium as the Tritan-based Anybear models. But for the price and the sheer convenience of the 5.8-inch chute, this is the strongest value proposition for families who juice in volume.
Why it’s great
- 5.8-inch chute is the largest — fits whole beets with no cutting
- Metal-free filter resists acid corrosion from beets
- High juice yield with dry pulp output
- Simple three-step assembly for quick daily use
Good to know
- Plastic body feels less premium than Tritan models
- Not as quiet as lower-RPM competitors
6. Jocuu Slow Masticating Juicer
The Jocuu juicer offers a rare feature at the budget end of the spectrum: dual-speed control. The 60 RPM soft speed is ideal for leafy greens and soft fruits, while the 80 RPM hard speed provides the extra torque needed for beets and carrots. This two-speed flexibility makes it a versatile option for users who juice a variety of produce, not just beets. The motor runs at under 60 decibels, which is quieter than many similarly priced models.
The BPA-free ABS construction is safe, and the anti-clogging reverse function is a welcome addition for dealing with the fibrous nature of beets. The automatic pulp ejection keeps the process continuous, and the juice-pulp separation is effective. Customer feedback over three-plus years of use shows that this juicer holds up well for regular, moderate use. The 4-year warranty on the motor and 2-year warranty on other parts provide peace of mind at this price tier.
However, the feed chute is narrower than the other options here, which means beets must be cut into smaller sticks or chunks to fit. This adds significant prep time compared to the wide-chute models. Some users also note that the juice yield from beets requires two passes through the machine to achieve optimal dryness. For occasional beet juicers on a tight budget, this is a solid entry point. For daily beet juicing, the extra prep time may become a frustration.
Why it’s great
- Dual-speed control lets you switch to high torque for beets
- Quiet operation below 60 decibels
- Long warranty coverage for the price tier
- Effective reverse function clears jams
Good to know
- Narrow chute requires cutting beets into small pieces
- Beet yield improves with a second pass through the machine
7. YOYDS Cold Press Juicer (5.5″)
YOYDS brings a clever design innovation to the budget category: a hidden pulp container that integrates into the body of the machine. This reduces the countertop footprint and eliminates the need for a separate pulp bucket, which is a genuine space saver in small kitchens. The 5.5-inch wide feed chute is among the largest on this list, fitting whole beets with no prep time. The 55 RPM slow masticating system preserves nutrients and keeps oxidation minimal.
The stainless steel filter is removable and rinses clean with the included brush. The multi-stage compression technology applies gradual pressure to the beets, which customers report yields a surprisingly high amount of juice with relatively dry pulp. The motor is powerful enough for daily use, and the assembly is tool-free and intuitive. The black finish looks modern and hides stains well.
The main trade-off at this entry price is the plastic construction, which does not feel as robust as the Anybear or Ninja models. Some users have reported that the pulp container, while clever, can be slightly tricky to empty completely. But for someone who wants a wide-chute masticating juicer for beets without spending into the three-figure range, the YOYDS delivers impressive functionality. It is best suited for beginners or those who juice beets occasionally rather than daily.
Why it’s great
- Hidden pulp container saves counter space
- 5.5-inch wide chute fits whole beets with no cutting
- Low 55 RPM operation preserves beet nutrients
- Very affordable entry point for masticating juicing
Good to know
- Plastic body is less durable than premium models
- Hidden pulp bin can be tricky to empty completely
FAQ
Can I juice whole beets without peeling them?
Why does my centrifugal juicer produce foamy beet juice?
How do I clean beet stains from the juicer parts?
What RPM is best for juicing beets?
Final Thoughts: The Verdict
For most users, the best juicer for beets winner is the Anybear Cold Press Juicer (4.3″) because it delivers the ideal combination of high torque, BPA-free Tritan materials, quiet operation, and easy cleanup at a mid-range price that supports daily use. If you want the absolute highest yield with the widest feed chute and dual-stage extraction, grab the Anybear 4.9″ model. And for the convenience of dishwasher-safe parts and never having to scrub beet pulp by hand, nothing beats the Ninja NeverClog JC151.